home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Night Owl 6
/
Night Owl's Shareware - PDSI-006 - Night Owl Corp (1990).iso
/
016a
/
skipper1.zip
/
README.1ST
< prev
next >
Wrap
Text File
|
1990-12-07
|
2KB
|
41 lines
Your manual is pre-formated to print on 8.5 x 11 in. paper with top & left
margins of 1.0 in. and right & bottom margins of 0.5 in. With SKIPPER, the
top, left & bottom margins are set auto- matically when you set the margins
with the print modes options menu. The right margin is governed by line
length. If the margins are not set, the PRINT command will print the manual
continuously flush with the left margin, with page breaks only at major
sections. The output, however, will be readable.
The PRINT command will be available within SKIPPER only after installation and
setup. SKIPPER installation, operation and use are detailed step by step in
the file MANUAL.DOC. To print the file now, use PRINT from DOS command line.
By default, SKIPPER has been set to execute from A: drive. You may therefore
view MANUAL.DOC from SKIPPER even prior to SKIPPER installation. Log on to
A:drive and insert SKIPPER diskette into the A: drive. Proceed as follows:
Type SKR and Press <─┘
Ignore the message Menu file missing.
Press F1
To call the FILE MANAGER
Press AltF key ( Alt and F keys simultaneously)
To switch to the alternate FKEY set
Press F7
To call KWIKLOOK.
Press ─┘
To select all files. The list of files in the SKIPPER disk will be
displayed in the left window. Move the Cursor to the MANUAL.DOC
file and press SPACEBAR to select the file. Press <─┘ to
execute KWIKLOOK.
Press Esc
To leave KWIKlOOK.
Press Esc
To leave FILE MANAGER.
Press F10
To return to DOS.
Please note that none of the file management functions on the FILE MANAGER's
first FKEY set or on the SKIPPER's main screen are available at this time. If
you press Esc from the main screen, the screen will clear and you will see the
prompt ?>. Enter ? to return to SKIPPER.